How to clean and disinfect bubble wrap bags

2025-03-11 13:39:44

The following methods can be used to clean and disinfect Bubble Wrap bags:

Cleaning method

Dry wipe: If the Bubble Film bag only has some dust or slight stains on the surface, you can use a clean, soft dry cloth or towel to gently wipe away the dust. You can also use tools such as a feather duster to sweep away the dust on the surface.

Wet wipe: For Bubble Film Bags with obvious stains, you can use a slightly wet soft cloth to wipe. Add a small amount of mild detergent in the water, such as dishwashing liquid, wet the soft cloth and twist it until it is half dry, then gently wipe the stains on the surface of the bubble film bag, wipe off the residual detergent with a clean wet towel after the completion of the wipe, and finally let it dry naturally.

Rinse: If the bubble film bag is dirty and the number is small, you can rinse it directly under the faucet, gently rub the stained part with your hand, so that the stain is washed away with the water. After washing, hang the bubble film bag in a well-ventilated place to dry, avoid direct sunlight, and prevent the bubble film bag from accelerating aging.

Disinfection method

Ultraviolet disinfection: The clean bubble film bag is placed in the sun to dry, the use of ultraviolet rays in the sun for natural disinfection, generally airing 2-3 hours to achieve a certain disinfection effect. You can also use the ultraviolet disinfection lamp, put the bubble film bag in the range of the ultraviolet lamp can be exposed to, according to the instructions for the use of the ultraviolet lamp to operate, usually irradiation 30 minutes to 1 hour or so can play a better disinfection effect.

Chemical disinfection

Alcohol disinfection: Use a cotton ball or soft cloth dipped in 75% alcohol, evenly wipe the surface of the bubble film bag, ensure that each part can be wiped, alcohol volatilization can be completed after disinfection.

Chlorine-containing disinfectant disinfection: according to the instructions for the use of chlorine-containing disinfectant, dilute it to a suitable concentration, the general effective chlorine content is 250-500mg/L. Soak the bubble film bag in the diluted disinfectant for 15-30 minutes, then remove and rinse with water, and let dry. However, it should be noted that chlorine-containing disinfectant may have a certain corrosion effect on the material of the bubble film bag, and it should be thoroughly cleaned after use.

Hydrogen peroxide disinfection: Spray 3% hydrogen peroxide solution on the surface of the bubble film bag, or soak the bubble film bag in the hydrogen peroxide solution for 5-10 minutes, and then dry naturally. Hydrogen peroxide decomposition will not leave harmful residues, relatively safe, but also pay attention to the possible impact on the material, high concentration of hydrogen peroxide may damage the bubble film bag.